Is destined for cleaning and widening the ditches, cutting new ditches, setting right the track-bed benches and the fill slopes of a formation, making the cross trenches in a rotor working zone, making the longitudinal trenches, profiling a ballast section, conveyance a cut material into a rolling stock or to a dump.
Power supply of MKT machine executive devices and its moving in a working mode is provided by traction module of УТМ-2М, ПТМ-63, ТЭУ-630 type.
It executes the following works:
- cleaning, deepening, widening and profiling the existing ditches and trenches;
- cutting the new ditches and trenches with profiling a fill slope bottom;
- leveling a surface of the track-bed benches and the fill slopes of a formation;
- removal of an odd ballast and the weeds from the track-bed benches of a formation, fill slopes, banquettes and cuts with loading into the universal gondola cars, rolling stock on a adjacent track or to a dump;
- moving and shifting a ballast on a track-bed bench of a formation;
- setting right a ballast section and leveling a ballast in an intertrack space.
Technical characteristics
|
Production capacity, m³/h |
200 |
|
Depth of cutting by rotor for one pass, m |
1,2 |
|
Penetration of a rotor device from a rail head level, m |
2,8 |
|
Extension of a rotor device on the buckets edge relatively to a track axis in a working mode, m: |
|
|
- maximum |
8,4 |
|
- minimum |
1,4 |
|
Maximum side arm of a plow from a track axis, m |
6,45 |
|
Maximum penetration of a plow from a rail head level, m |
1,62 |
|
Distance of unloading from a track axis, m |
12 |
|
Speed of movement as a part of train, km/h |
70 |
|
Speed of movement in a working mode, km/h: |
|
|
- with a rotor device |
from 0,1 to 1,0 |
|
- with the plows |
from 0,1 to 4,9 |
|
Required pulling force, kN (t), but no more than |
150(15) |
|
Length on the automatic couplers axes, mm |
21730+-100 |
|
Wheelbase of the machine, mm |
14750+-50 |
|
Quantity of servicing staff, pers. |
2 |
|
Weight, t |
100 |
|
Consumed power, kW |
120 |
|
Width of a track, mm |
1520 |
|
Negotiation into a gabarit ГОСТ 9238-83 in a transport position |
1-Т |
|
Minimum radius of passable curvature, m |
110 |
|
Time of conversion of the machine from transport to working position, min |
15 |
|
Time of conversion of the machine from working to transport position (in case of emergency), min no more than |
20 |
TULAZHELDORMASH
© Roctok LLC group of companies, 2024