Snow flanger CC-3

Price: upon request

Is destined for execution of the following works:
in summer:
- cleaning and cutting the ditches;
- cutting the fill slopes in the pits;
- leveling works when making the second tracks;
- cutting and leveling a ground and a ballast.
in winter:
- snow removal from the tracks on the spans when running is right-hand or left-hand;
- snow removal from the station tracks, ice shearing on the tracks;
- pulling-off a snow in the places of snow consists unloading;
- ripping-up the ditches from snow for passing a spring water, removing a snow from the short-distance pits.

Electrical appliances supply, heating and lighting from its own electric station.

Technical characteristics

Production capacity, m³/hour
when cutting the ditches	1050
when cutting and leveling a ground and a ballast	3000
when removing a snow from the tracks	62500
Maximum height of removable snow, m	1,5
Width of a band cleaned from a snow, m	3,2-6,0
Maximum arm of a ground wing relatively to a track axis, m	7,7
Depth of cut ditches from a rail head level, m	1,8
Penetration of the executive devices of a moldboard unit lower from a rail head level, m, no more than	0,05
Power of an energy plant of a crew life support system, kW	16
Length on the automatic couplers axes, m	25,5
Weight, t	102
Service staff, pers.	2
Hauling capacity on an automatic coupler when working, t, no more than	29
Air working pressure, MPa (kg-f/cm²)	0,6(6)
Pneumatic cylinders and pneumatic motors control	pneumatic spigots
Minimum radius of curving, m	160
Movement speed, km/h:
transport, no more than	80
working at earthworks, in the limits	3-15
working when removing a snow from the tracks with a moldboard device, no more than	80

TULAZHELDORMASH

You, probably, may be interested in the following equipment::

Mounting diesel motоr-rail car 1АДМ-1.5

Railway laying crane КЖУ-571

Ballast spreader РБ