The snow flanger is used for execution of cleaning the old and cutting new ditches, formation shearing and when leveling the fill slopes and the pits.
The snow flanger is used for execution of cleaning the old and cutting new ditches, formation shearing and when leveling the fill slopes and the pits, when building the second railway tracks and execution other leveling works.
The snow flanger is used in winter for snow removing from the railway tracks when a snow height is up to 2 m at the stations and the spans, for snow removing from the ditches when there are deep banks and when dumping a snow in the places of unloading of the snow consists, snow removing from the pits, ripping-up the ditches from snow for passing a spring water. Combination of snow and earth parts in one machine allows using it in building, repairs and current maintenance of a track according to accepted technology of performing these works practically throughout the year.
Production capacity when snow removing – 64100 m³/hour
Production capacity when cutting the ditches – 1050 m³/hour
Production capacity when shearing and leveling
an earth and a ballast - 3000 m³/hour
Maximum width of cleaned band – 5,2 m
Maximum height of removable snow – 2,0 m
Maximum penetration of a ditch part below
a rail head level – 1,8 m
Maximum arm of a wing (from a track axis) – 7,7 m
- working at earthworks – 3-15 km/h
- when a snow removing – up to 80 km/h
- transportation as a part of a train – up to 80 km/h
Wheel base – 16500 mm
- length – 2470 mm
- width – 3045 mm
- height – 4875 mm
Weight – 100 t
Crew – 2 pers.
Manufacturer “TULAZHELDORMASH”, JSC