Liner-tamper-straightening machine ВПРС-П of a mean type is a universal track machine of a cyclic action executing simultaneous or independent alignment, straightening and tamping of a railway track in longitudinal and cross profiles and in projection and also a ballast compacting under the sleepers and the bars of the turnouts and the frogs.
ВПРС-П executes its work in semi-automatic an manual modes on the straight and curvilinear track sections with the rails up to P65 inclusively with the wooden and ferro-concrete sleepers and also on the turnouts with the wooden bars and frogs of from 1/9 up to 1/22 marks.
Having similar to ВПРС-02 production capacity of tra alignment and tamping ВПРС-П is more simple in exploitation, has higher value of maximum surmountable track slope, smaller radius of passable curvature in a working and transport position, that makes the machine attractive for use on the approach, intra-factory and technological tracks of the industrial enterprises.
Climatic version type У, allocation category 1 under ГОСТ 15150, but for work at an environment temperature from -10°C up to +40°C when a ballast is not regelated.
Main technical characteristics*
|
Denomination of parameter |
Value of parameter |
|
Production capacity: when aligning and tamping a track, sleepers/hour, up to when tamping the turnouts, turnouts/hour, up to |
700 1,0 |
|
Maximum value of track raising, mm |
80 |
|
Maximum value of track shift, mm |
80 |
|
Force of raising, kN |
250±5% |
|
Force of shift, kN |
170±10% |
|
Accuracy of track alignment in a cross profile (on a level), mm |
±3,0 |
|
Quantity of tamping blocks, pc |
2 |
|
Maximum surmountable track slope in the working and transport modes, ‰ (grades) |
60 (3,42) |
|
Maximum transport speed of self-propelled movement,km/h |
50 |
|
Minimum radius of passed curvatures, m: when the executing devices are in a transport position when in a working position |
60 80 |
|
Overall dimensions, mm length (on the automatic couplers axes) height (with aerial) width wheelbase |
12 550±100 4 150±50 3 100±50 8 000±50 |
|
Negotiation into gabarit in a transport position under ГОСТ 9238 |
1–T |
|
Power of a power plant, kW (hp) |
176 (240) |
|
Weight in equipped condition, t |
30 |
|
Control crew, pers. |
2 |
1st May Kirovsky Mashzavod
*To provide technical characteristics required to the machine, the elements of a permanent way crest structure (rails, sleepers, binds, ballast, profile, etc.) must meet the requirements of the normative-technical documents valid relatively to the railways of a customer.
The Enterprise reserves the right to bring alteration into kitting-up and technical characteristics of produced equipment. Technical characteristics and possible kitting-up shall be necessary specified in a process of preparing of a request.
© Roctok LLC group of companies, 2024